Chain Coal Stove

Doyen (China) Machinery Co., Ltd has combined with Foshan Fenghui Machinery Co., Ltd to manufacture hot air stove with highest quality and best service. Since 1998, "FENGHUI" brand Chain Coal Stoves have been widely known in ceramic industries both in and out of China for its good quality and cost effective.

FHM chain type coal burning hot air stove uses the AII grade bituminous coal (or other coals) as the fuel. The coal drops from the coal hopper to the front of the chain, moves slowly along with the grate from damper to the furnace tank, the height of the damper can be adjusted freely in order to control the thickness of coal seam. The air goes to the bottom of the chain in partition, and then intersects with coal seam from the other direction. The coal is heated in the thermal radiation way, followed by pre-heating, ignition, combustion, and burnout process. The ash sediment moves with the chain to its rearward and drops to the water-cool ash hopper from strobe. A lot of hot air is caused during the coal combustion and it meets the requirement of high temperature heat gas source after being purified by the cyclone dust-collector.

At the same time, it matches with the advanced temperature monitoring, fan air flux regulating and the chain grate speed controlling system, in order to make sure that the stove can supply steady heat for the system.

Nowadays, the FHM chain type coal burning hot air stove has been widely used in the raw material preparing process of ceramic industry. And the main features of the Stove are as following:

Ignites easily, temperature increase quickly, good thermal insulation.

Steady heat supply and high efficiency.

Operated conveniently, run safely and long working life.